Each "Inset" base seat cabinet is 21" deep by 17" tall. Special Order Inset Shaker base kitchen cabinet RTA.

Standard sizes are shown. This cabinet can be ordered to most any width and height to the closest 1/4".

The front of the cabinet has a single drawer. There is 4-1/2" toe kick, 1-1/2" face frame and 9-1/2" Drawer face with a 9-3/8" tall drawer face and 6" deep drawer.

Full extension, soft close glides on the drawers for easy operation. All hardware manufactured by SH-ABC. (Click here to link to the drawer slides website)

Plywood construction cabinets (5/8") with solid wood dovetail drawer boxes and 3/4" shelves (where applicable). The drawers are solid hardwood with a clear finish.

The front of the cabinet has an inset-style face frame made of solid Hardwood with the doors and drawer fronts flush with the face frame. The cabinet sides, bottom, and top (boxes) are constructed of 5/8″ premium plywood. The face frames and doors are made from 100% hardwood. The face frame and doors are painted finish. All other exposed visible areas will require skin finish and trim where necessary.

The cabinet box and shelving are coated with a clear UV protectant finish. Skin panels must be ordered for all exposed sides.

The face frames and door frames are all made of 100% birch hardwood and custom painted with oil based UV Lacquer paint and the cabinet box and shelving are coated with a clear UV protectant finish. Each cabinet door and drawer front is made of five pieces with tongue and groove joinery.. The cabinet door frames are 7/8 inches thick and are made of five separate pieces with tongue and groove joinery. The center panel is 1/4 inch thick and inset into the door frame.

Please note that all cabinet exterior exposed visible areas will require skin finish and trim as necessary.

This cabinet is covered by a one year manufacturer's warranty with lifetime hardware warranty..

California CARB2 Compliant

Bench Seat Cabinet 17" Tall 21" Deep Special Order Inset Shaker - Single Drawer 9", 12", 15", 18" & 21"