$976.95 $1,404.00 You save: 30% ($427.05)
Double Bathroom Vanity Sink Base cabinet 60" wide by 21" deep by 32" tall. Dark Gray Inset Shaker Vanity base cabinet RTA (Ready to Assemble).
The front of the cabinet has two static (non-movable) drawer fronts and four doors with soft-close hinges for comfortable operation. The center drawers operate on full extension soft close hardware.
All hardware manufactured by SH-ABC. (Click here to link to the drawer slides website).
This cabinet is covered by a one year manufacturer's warranty and the hardware is covered with a lifetime warranty.
The front of the cabinet has an inset-style face frame made of solid hardwood. The face frames and doors are made of 100% hardwood and are painted with a UV Lacquer finish. The cabinet door frames are 7/8 inches thick and are made of four separate pieces with tongue and groove joinery. The center panel is 1/4 inch thick and inset into the door frame. The cabinet face is made of solid birch wood and is 1-3/4 inches thick, including a 1-inch face frame and 3/4-inch interior stop frame. The cabinet sides, bottom, and top are made of 5/8-inch premium plywood with two (2) 3/4" adjustable shelves included. All other exterior exposed visible areas are natural birch finish with UV finish and will require skin finish and/or trim as necessary.
Hinges are adjustable to maintain proper spacing between door(s) and face frame.
The cabinets are equipped with hardware from DTC, a quality cabinet hardware manufacturer, and have full-extension glides with a soft-close feature. The door hardware will stay open at 105 degrees and softly close with a light push.
Please note that all exterior exposed visible areas may require skin finish and trim as necessary. The image with colored sides shows a cabinet with a skin panel applied.
This cabinet is covered by a one year manufacturer's warranty.
California CARB2 Compliant
The picture shown is not accurate. No horizontal rail between drawers and doors.