Each "Inset" vanity base cabinet is 21" deep by 32" tall. Special Order Inset Shaker base Vanity Sink Base cabinet RTA.

The front of the cabinet has a single FIXED top drawer face and the lower section has a single door.

Soft close hinges. All hardware manufactured by SH-ABC. (Click here to link to the drawer slides website)

Plywood construction cabinets (5/8") with solid wood dovetail drawer boxes and 3/4" shelves (where applicable). The drawers are solid hardwood with a clear finish.

Hinges are adjustable to maintain proper spacing between door(s) and face frame.

The front of the cabinet has an inset-style face frame made of solid Hardwood with the doors and drawer fronts flush with the face frame. The cabinet sides, bottom, and top (boxes) are constructed of 5/8″ premium plywood. The face frames and doors are made from 100% hardwood. The face frame and doors are painted finish. All other exposed visible areas will require skin finish and trim where necessary.

The cabinet box is coated with a clear UV protectant finish. Skin panels must be ordered for all exposed sides.

The face frames and door frames are all made of 100% birch hardwood and custom painted with oil based UV Lacquer paint and the cabinet box and shelving are coated with a clear UV protectant finish. Each cabinet door and drawer front is made of five pieces with tongue and groove joinery.. The cabinet door frames are 7/8 inches thick and are made of four separate pieces with tongue and groove joinery. The center panel is 1/4 inch thick and inset into the door frame.

Soft close hinges. All hardware manufactured by SH-ABC. (Click here to link to the drawer slides website)

The door hardware will stay open at 105 degrees and softly close with a light push.

Please note that all cabinet exterior exposed visible areas will require skin finish and trim as necessary.

This cabinet is covered by a one year manufacturer's warranty with lifetime hardware warranty..

California CARB2 Compliant

Vanity Base Cabinet