Farm Sink Base White Oak Inset Shaker Cabinets 30", 33", 36" or 39" - Special Order

Farm Sink Base cabinet 24" deep by 34-1/2" tall. White Oak Shaker sink base kitchen cabinet RTA (Ready to Assemble).  Special Order

The 30 inch Farm Sink Base cabinet fits a 27" farm sink (not included).

The 33 inch Farm Sink Base cabinet fits a 30" farm sink (not included).

The 36 inch Farm Sink Base cabinet fits a 33" farm Sink (not included). 

The 39 inch Farm Sink Base cabinet fits a 36" farm sink (not included).

The 42 inch Farm Sink Base cabinet fits a 39" farm sink (not included).

Click here to see our 33" ceramic sink.

Your farm sink installation may/will require additional trim on the underside of the sink between the sink and face frame. The sink shown above is 10.04 height with the cabinet opening 10-1/4" which required 1/4" filler/trim for 3CM countertops and 1" filler/trim for 2CM countertops.

The front of the cabinet is designed for the farm sink location and two doors with six (6) way adjustable soft close hinges for comfortable operation and easy alignment within the inset frame. Hinges are adjustable to maintain proper spacing between door(s) and face frame.

Hinges are adjustable to maintain proper spacing between door(s) and face frame.

The front of the cabinet has an inset-style face frame made of solid Hardwood with the doors and drawer fronts flush with the face frame. The cabinet sides, bottom, and top (boxes) are constructed of 5/8″ premium plywood. The face frames and doors are made from 100% hardwood. The face frame and doors are painted finish. All other exposed visible areas will require skin finish and trim where necessary.

The cabinet box and shelving are coated with a clear UV protectant finish. Skin panels must be ordered for all exposed sides.

The face frames and door frames are all made of 100% birch hardwood and custom painted with oil based UV Lacquer paint and the cabinet box and shelving are coated with a clear UV protectant finish. Each cabinet door and drawer front is made of five pieces with tongue and groove joinery.. The cabinet door frames are 7/8 inches thick and are made of four separate pieces with tongue and groove joinery. The center panel is 1/4 inch thick and inset into the door frame.

Full extension, soft close glides on the drawers for easy operation. Soft close hinges. All hardware manufactured by SH-ABC. (Click here to link to the drawer slides website)

The door hardware will stay open at 105 degrees and softly close with a light push.

Please note that all cabinet exterior exposed visible areas will require skin finish and trim as necessary.

This cabinet is covered by a one year manufacturer's warranty with lifetime hardware warranty..

California CARB2 Compliant.

The cabinet shown with a white side had a skin Panel applied (sold separately).

Attention- Cabinet image shows a middle shelf. The cabinet DOES NOT come with this feature.