Dishwasher Base Panel Plus Face Frame Elegant Craftsman Mocha Shaker Cabinet Side

The Elegant Craftsman Mocha Shaker Dishwasher End Panel gives your appliance run a clean, finished look wherever a cabinet side is left exposed. Cut from 1/2"-thick 7-ply plywood and finished in the line's rich, milk-chocolate Mocha stain, this panel encloses the side of a dishwasher or other appliance so it reads as built-in cabinetry rather than an open gap. A 1-1/2" wide, 3/4"-thick solid oak face frame wraps the exposed plywood edge for a substantial, custom-fit finish that matches your cabinet fronts.

Installed at the exposed side of an appliance, the panel delivers that "boxed-in," fully finished appearance—covering the raw appliance side and tying it seamlessly into the surrounding Mocha Shaker cabinets.

Features

• Finished side panel to enclose exposed appliance sides (dishwasher or similar)
• 1/2"-thick 7-ply plywood construction
• 1-1/2" wide, 3/4"-thick solid oak face frame covers the exposed plywood edge
• Creates a "boxed," built-in look for appliances
• One visible side finished in the line's rich Mocha stain
• Color-matched to Elegant Craftsman Mocha Shaker cabinets
• Easily cut to size on site

Specifications
Line: Elegant Craftsman Mocha Shaker
Color / Finish: Mocha stain + clear UV protectant (one visible side)
Type: Dishwasher / Appliance End Panel
Width: 24"
Height: 34-1/2"
Thickness: 1/2" (7-ply plywood)
Face Frame: 1-1/2" wide x 3/4" thick, solid oak
Material: 7-ply plywood panel, solid oak face frame
Assembly: RTA
Compliance: California CARB2

Construction & Finish — Mocha Elegant Craftsman Shaker

The face frame and the door and drawer frames are solid oak milled in the Elegant Craftsman profile, with 1/4" plywood center panels. The medium umber Mocha stain sits under a UV Clear Matte Finish, deepening the oak grain with a rich, warm tone. Cabinets up to 21" wide have a single door (pantries: two — one top, one bottom); 24"–42" widths have double doors (pantries: four — two top, two bottom).

The cabinet box is birch plywood finished to match the line. For a perfect exterior color and grain match, oak skin panels are required on all exposed sides; toe kick skin matches the exterior. Crown and trim pieces are solid oak.

Drawer boxes are solid wood with 1/2" thick sides, dovetail joints, and a 1/2" plywood bottom set in a dado cut, riding on DTC D-Motion face-frame full-extension soft-close undermount slides with Peg Lock. Doors swing on European-style hidden soft-close hinges. Cabinet hardware carries a lifetime warranty.

In-Stock Contractor Grade A ready to assemble (RTA) Craftsman kitchen cabinets for residential new construction and remodeling. All assembly hardware included; cabinet handles not included.

This is a stock cabinet, sold in the size options shown on this page. Check its dimensions under Construction.

Before ordering, confirm your finished opening, appliance clearances, and any exposed cabinet sides that need matching skin panels, toe kick, or trim.

Ready for pickup at our Carson warehouse in 3 days.

In stock and ready to ship. Delivery is by RTA Wholesalers company vehicle or LTL freight carrier, or you can pick up at our Carson, CA warehouse. Estimated delivery and shipping details are managed through your customer portal.

Shipping is free. Pantry cabinets and large skin panels ship on full-size pallets, so orders that include them need a $2,500 minimum to qualify for free shipping.

Returns: stock cabinets can be returned within 30 days, unassembled and in the original box. There is no restocking fee; the customer pays return shipping.

Assembly details are listed under Construction. Plan assembly and installation after delivery. Lifetime hardware warranty.

Can I order this cabinet in a custom size or color?

No. This is a stock cabinet, sold in the sizes and finish shown on this page.

Can I return this cabinet?

Yes, within 30 days, unassembled and in the original box. There is no restocking fee; the customer pays return shipping.

What should I confirm before ordering?

Confirm the cabinet width, height, and depth, your finished opening, appliance clearances, and any exposed sides that need matching panels or trim.