
Product description
Wall Oven cabinet by 24"deep. 1-1/4" Natural 17ROS - Redondo White Oak Shaker Wall Oven kitchen cabinet RTA (Ready to Assemble).
The width of the opening is 27 with a total height of 54"s.
You can trim the face frame to accommodate an appliance with a box up to 31"s.
This is a two part cabinet. The lower section is 66" tall. The upper section will be...
18" for a a total of 84"
21" for a total of 87"
24 for a total of 90"
27" for a total of 93"
30" for a total of 96"
The front of the cabinet has two (2) doors with soft close hinges above the ovens and a drawer below the ovens on full extension soft closing hardware.
Each oven cabinet 33" include has a pair doors and a drawer which "Overlays" wider and taller than the opening in the face frame with the minimum face frame showing.
Wall Oven cabinets do NOT have interior shelving.
Skin panels are required for exposed sides. The skin panel will cover the seam on the side between the 66" tall lower section and the upper section 18", 21", 24", 27" and 30".
Our Natural 17ROS - Redondo White Oak Shaker 1-1/4" Overlay base kitchen cabinets, the perfect addition to any kitchen remodel or new construction project. These cabinets are ready to assemble (RTA) and feature a single door providing ample storage space for all of your kitchen essentials.
The 1-1/4" Overlay style cabinet has doors and drawer fronts that are wider and taller than the opening in the face frame with a minimum of face frame showing. Only 1/4" of face frame is exposed left and right of the Door(s).
Construction & Finish — Natural White Oak Shaker
Doors and drawer fronts are 3/4" solid oak frames with a 1/4" plywood center panel, protected by a durable Clear UV finish that showcases the natural white oak grain. The face frame is 1-1/2" wide x 3/4" thick solid oak with the same Clear UV finish.
The cabinet box is 1/2" 7-ply plywood. The interior is natural birch with a clear finish, and shelving is coated with a clear UV protectant finish. Cabinet sides are factory-finished in painted white; oak-matched skin panels are required on any exposed side so every visible surface matches the natural oak fronts. Toe kick skin is also required to match the exterior.
Installer note: the cabinet underside ships unfinished. A diligent installer will finish the bottom edge for a fully detailed installation.
Drawer boxes are solid wood with 1/2" thick sides and dovetail joints, riding on DTC D-Motion face-frame full-extension soft-close undermount slides with Peg Lock. Doors swing on European-style hidden soft-close hinges. Cabinet hardware carries a lifetime warranty. A small amount of glue is recommended when assembling drawer boxes.
In-Stock Contractor Grade A ready to assemble (RTA) white oak kitchen cabinets suit both residential new construction and remodeling projects. All hardware needed to assemble the cabinetry is included; cabinet handles are not included.