Cabinet for the ALFI Step Rim Fireclay Workstation ABFS3320S Farmhouse Sink
The ALFI Step Rim Fireclay Workstation ABFS3320S is a 33″ wide workstation top-mount (drop-in) apron-front sink. It needs a 36″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, to the nearest 1/4″. We build it to order in any Sherwin-Williams color or natural white oak.
Fireclay sinks are kiln-fired, so each one can vary by about 1/4″ from its listed size. Measure your sink when it arrives and we build the cabinet to the measurement.
Inset farm sink base, 24″ deep × 34-1/2″ tall, apron opening cut to this sink. Any width to the nearest 1/4″.
This top-mount apron sink rests on the cabinet. We cut the apron opening to the sink's spec sheet. Call us for details.
How your countertop changes the cabinet
With 3cm natural stone, quartz or butcher block, the ALFI Step Rim Fireclay Workstation ABFS3320S sits flush with the top of the cabinet. With a 2cm counter, the sink sits 5/8″ to 3/4″ above the cabinet top, so the apron opening below it is that much shorter.
Will an inset cabinet hold this sink?
Yes. The inset face frame doesn't carry the sink's weight. Your cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a fireclay sink of any weight. Call us for details on supports for the ALFI Step Rim Fireclay Workstation ABFS3320S.
ALFI Step Rim Fireclay Workstation ABFS3320S specifications
| Model | ABFS3320S |
|---|---|
| Also sold as | ABFS3320S-W, -BM, -GM |
| Overall width | 33″ |
| Front to back | 20″ |
| Apron height | 10″ |
| Bowl depth | 9″ |
| Bowl | Single bowl |
| Material | Fireclay |
| Installation | top-mount (drop-in) apron-front |
| Workstation ledge | Yes |
Included accessories: Bamboo cutting board; Stainless steel drain mat; Stainless steel bottom grid.
Questions about the ALFI Step Rim Fireclay Workstation ABFS3320S cabinet
What size cabinet do I need for the ALFI Step Rim Fireclay Workstation ABFS3320S?
The ALFI Step Rim Fireclay Workstation ABFS3320S is 33″ wide, so it needs a 36″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, rounded to the nearest 1/4″. We build farm sink bases to order at any width to the nearest 1/4″, in any Sherwin-Williams color or in white oak.
How tall is the apron opening for the ALFI Step Rim Fireclay Workstation ABFS3320S?
The ALFI Step Rim Fireclay Workstation ABFS3320S is a top-mount apron sink, so it rests on the cabinet rather than hanging below the counter. Send us the sink's spec sheet and we cut the apron opening to its exact apron height. Call us for details.
Can an inset cabinet hold a heavy fireclay sink?
Yes. The inset face frame doesn't carry the sink's weight. The cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a sink of any weight, including fireclay and cast iron. Call us for details on the supports for your sink.
What colors can the cabinet for the ALFI Step Rim Fireclay Workstation ABFS3320S come in?
Any Sherwin-Williams color, through our special-order program, or natural white oak. The face frame and doors are solid hardwood with flush inset doors, and the painted finish is factory-baked UV-cured lacquer.
Order the cabinet for this sink
Pick your finish, then tell us your sink model and countertop. We confirm every number against your sink's spec sheet before production. Special-order cabinets are built in 8–11 weeks.
Other ALFI farmhouse sinks
- ALFI Step Rim Fireclay Workstation ABFS3020 — 30″ sink, 33″ cabinet
- ALFI Granite Composite AB33FARM — 33″ sink, 36″ cabinet
- ALFI Step Rim Fireclay Double Workstation ABFS3320D — 33″ sink, 36″ cabinet
Specifications from ALFI's published information: source 1 · source 2. ALFI is a trademark of its owner; RTA Wholesalers is not affiliated with ALFI. Always confirm against your sink's spec sheet before ordering — we check it with you before production.