Stock, Semi-Custom & Custom  |  Inset & Overlay Kitchen Cabinets  📞 833-377-8663

Cabinet for the Bocchi Contempo 33 Step Rim 1504 Farmhouse Sink

The Bocchi Contempo 33 Step Rim 1504 is a 33″ wide workstation undermount apron-front sink. It needs a 36″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, to the nearest 1/4″. We build it to order in any Sherwin-Williams color or natural white oak.

Fireclay sinks are kiln-fired, so each one can vary by about 1/4″ from its listed size. Measure your sink when it arrives and we build the cabinet to the measurement.

Your cabinet
36″ wide

Inset farm sink base, 24″ deep × 34-1/2″ tall, apron opening cut to this sink. Any width to the nearest 1/4″.

Apron opening

Bocchi doesn't publish the apron height for this sink. Send us its spec sheet and we cut the opening to fit your countertop.

How your countertop changes the cabinet

With 3cm natural stone, quartz or butcher block, the Bocchi Contempo 33 Step Rim 1504 sits flush with the top of the cabinet. With a 2cm counter, the sink sits 5/8″ to 3/4″ above the cabinet top, so the apron opening below it is that much shorter.

Will an inset cabinet hold this sink?

Yes. The inset face frame doesn't carry the sink's weight. Your cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a fireclay sink of any weight. Call us for details on supports for the Bocchi Contempo 33 Step Rim 1504.

Bocchi Contempo 33 Step Rim 1504 specifications

Model1504
Also sold as1504-001-0120 white, 1504-002-0120 matte white
Overall width33″
Front to back19″
Apron heightNot published by Bocchi
Bowl depth8-7/8″
BowlSingle bowl
MaterialFireclay
Installationundermount apron-front
Workstation ledgeYes

Included accessories: 2300 2004 SS sink rack (chrome); 2330 0001 chrome strainer; 2320 0001 cutting board; 2310 0003 colander; 2350 0001 roller mat.

Questions about the Bocchi Contempo 33 Step Rim 1504 cabinet

What size cabinet do I need for the Bocchi Contempo 33 Step Rim 1504?

The Bocchi Contempo 33 Step Rim 1504 is 33″ wide, so it needs a 36″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, rounded to the nearest 1/4″. We build farm sink bases to order at any width to the nearest 1/4″, in any Sherwin-Williams color or in white oak.

How tall is the apron opening for the Bocchi Contempo 33 Step Rim 1504?

Bocchi doesn't publish this sink's apron height. With 3cm stone, quartz or butcher block the sink sits flush with the cabinet top; with 2cm it sits 5/8″ to 3/4″ higher. Send us the spec sheet and we cut the opening to fit.

Can an inset cabinet hold a heavy fireclay sink?

Yes. The inset face frame doesn't carry the sink's weight. The cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a sink of any weight, including fireclay and cast iron. Call us for details on the supports for your sink.

What colors can the cabinet for the Bocchi Contempo 33 Step Rim 1504 come in?

Any Sherwin-Williams color, through our special-order program, or natural white oak. The face frame and doors are solid hardwood with flush inset doors, and the painted finish is factory-baked UV-cured lacquer.

Order the cabinet for this sink

Pick your finish, then tell us your sink model and countertop. We confirm every number against your sink's spec sheet before production. Special-order cabinets are built in 8–11 weeks.

Painted inset — any Sherwin-Williams colorWhite oak insetCall or message us

Other Bocchi farmhouse sinks

Specifications from Bocchi's published information: source 1 · source 2. Bocchi is a trademark of its owner; RTA Wholesalers is not affiliated with Bocchi. Always confirm against your sink's spec sheet before ordering — we check it with you before production.