Cabinet for the DeerValley DV-1K0067 Farmhouse Sink
The DeerValley DV-1K0067 is a 32.87″ wide workstation undermount apron-front sink. It needs a 35-3/4″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, to the nearest 1/4″. We build it to order in any Sherwin-Williams color or natural white oak.
Fireclay sinks are kiln-fired, so each one can vary by about 1/4″ from its listed size. Measure your sink when it arrives and we build the cabinet to the measurement.
Inset farm sink base, 24″ deep × 34-1/2″ tall, apron opening cut to this sink. Any width to the nearest 1/4″.
DeerValley lists a 35.24″ minimum standard cabinet. Standard cabinets come in 3″ steps; because we build to the 1/4″, yours is sized to the sink itself.
DeerValley doesn't publish the apron height for this sink. Send us its spec sheet and we cut the opening to fit your countertop.
How your countertop changes the cabinet
With 3cm natural stone, quartz or butcher block, the DeerValley DV-1K0067 sits flush with the top of the cabinet. With a 2cm counter, the sink sits 5/8″ to 3/4″ above the cabinet top, so the apron opening below it is that much shorter.
Will an inset cabinet hold this sink?
Yes. The inset face frame doesn't carry the sink's weight. Your cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a fireclay sink of any weight. Call us for details on supports for the DeerValley DV-1K0067.
DeerValley DV-1K0067 specifications
| Model | DV-1K0067 |
|---|---|
| Also sold as | DV-1K0067B black, DV-1K0067GY gray |
| Overall width | 32.87″ |
| Front to back | 20″ |
| Apron height | Not published by DeerValley |
| Bowl depth | 9.13″ |
| Bowl | Single bowl |
| Material | Fireclay |
| Installation | undermount apron-front |
| Workstation ledge | Yes |
Included accessories: Basket Strainer; Basin Rack/Bottom Grid; Cutting Board; Colander.
Questions about the DeerValley DV-1K0067 cabinet
What size cabinet do I need for the DeerValley DV-1K0067?
The DeerValley DV-1K0067 is 32.87″ wide, so it needs a 35-3/4″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, rounded to the nearest 1/4″. We build farm sink bases to order at any width to the nearest 1/4″, in any Sherwin-Williams color or in white oak.
How tall is the apron opening for the DeerValley DV-1K0067?
DeerValley doesn't publish this sink's apron height. With 3cm stone, quartz or butcher block the sink sits flush with the cabinet top; with 2cm it sits 5/8″ to 3/4″ higher. Send us the spec sheet and we cut the opening to fit.
Can an inset cabinet hold a heavy fireclay sink?
Yes. The inset face frame doesn't carry the sink's weight. The cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a sink of any weight, including fireclay and cast iron. Call us for details on the supports for your sink.
What colors can the cabinet for the DeerValley DV-1K0067 come in?
Any Sherwin-Williams color, through our special-order program, or natural white oak. The face frame and doors are solid hardwood with flush inset doors, and the painted finish is factory-baked UV-cured lacquer.
Order the cabinet for this sink
Pick your finish, then tell us your sink model and countertop. We confirm every number against your sink's spec sheet before production. Special-order cabinets are built in 8–11 weeks.
Other DeerValley farmhouse sinks
- DeerValley Harvest DV-1K026 — 30.12″ sink, 33″ cabinet
- DeerValley DV-1K0068 — 32.87″ sink, 35-3/4″ cabinet
- DeerValley DV-1K0162W — 32.87″ sink, 35-3/4″ cabinet
- DeerValley DV-1K0263 — 32.99″ sink, 36″ cabinet
- DeerValley DV-1K0266 — 32.99″ sink, 36″ cabinet
- DeerValley DV-1K0161W — 33″ sink, 36″ cabinet
Specifications from DeerValley's published information: source 1 · source 2. DeerValley is a trademark of its owner; RTA Wholesalers is not affiliated with DeerValley. Always confirm against your sink's spec sheet before ordering — we check it with you before production.