Stock, Semi-Custom & Custom  |  Inset & Overlay Kitchen Cabinets  📞 833-377-8663

Cabinet for the Ruvati Fiore RVL2387 Farmhouse Sink

The Ruvati Fiore RVL2387 is a 32-1/2″ wide workstation undermount apron-front sink. It needs a 35-1/2″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, to the nearest 1/4″. We build it to order in any Sherwin-Williams color or natural white oak.

Ruvati's spec sheet says 32-1/2″ wide, but its product page says 33″. We size from the spec sheet; measure your sink or send its spec sheet before ordering.

Your cabinet
35-1/2″ wide

Inset farm sink base, 24″ deep × 34-1/2″ tall, apron opening cut to this sink. Any width to the nearest 1/4″.

Ruvati lists a 36″ minimum standard cabinet. Standard cabinets come in 3″ steps; because we build to the 1/4″, yours is sized to the sink itself.

Apron opening

Ruvati doesn't publish the apron height for this sink. Send us its spec sheet and we cut the opening to fit your countertop.

How your countertop changes the cabinet

With 3cm natural stone, quartz or butcher block, the Ruvati Fiore RVL2387 sits flush with the top of the cabinet. With a 2cm counter, the sink sits 5/8″ to 3/4″ above the cabinet top, so the apron opening below it is that much shorter.

Will an inset cabinet hold this sink?

Yes. The inset face frame doesn't carry the sink's weight. Your cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a fireclay sink of any weight. Call us for details on supports for the Ruvati Fiore RVL2387.

Ruvati Fiore RVL2387 specifications

ModelRVL2387
Also sold asWH White, BK Black, BS Biscuit, EG Emerald Green
Overall width32-1/2″
Front to back18-3/4″
Apron heightNot published by Ruvati
Bowl depth9″
BowlSingle bowl
MaterialFireclay
Installationundermount apron-front
Workstation ledgeYes

Included accessories: solid hardwood cutting board (RVA1217); folding drying rack (RVA1395); stainless rinse grid; basket strainer (RVA1039ST).

Questions about the Ruvati Fiore RVL2387 cabinet

What size cabinet do I need for the Ruvati Fiore RVL2387?

The Ruvati Fiore RVL2387 is 32-1/2″ wide, so it needs a 35-1/2″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, rounded to the nearest 1/4″. We build farm sink bases to order at any width to the nearest 1/4″, in any Sherwin-Williams color or in white oak.

How tall is the apron opening for the Ruvati Fiore RVL2387?

Ruvati doesn't publish this sink's apron height. With 3cm stone, quartz or butcher block the sink sits flush with the cabinet top; with 2cm it sits 5/8″ to 3/4″ higher. Send us the spec sheet and we cut the opening to fit.

Can an inset cabinet hold a heavy fireclay sink?

Yes. The inset face frame doesn't carry the sink's weight. The cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a sink of any weight, including fireclay and cast iron. Call us for details on the supports for your sink.

What colors can the cabinet for the Ruvati Fiore RVL2387 come in?

Any Sherwin-Williams color, through our special-order program, or natural white oak. The face frame and doors are solid hardwood with flush inset doors, and the painted finish is factory-baked UV-cured lacquer.

Order the cabinet for this sink

Pick your finish, then tell us your sink model and countertop. We confirm every number against your sink's spec sheet before production. Special-order cabinets are built in 8–11 weeks.

Painted inset — any Sherwin-Williams colorWhite oak insetCall or message us

Other Ruvati farmhouse sinks

Specifications from Ruvati's published information: source 1 · source 2. Ruvati is a trademark of its owner; RTA Wholesalers is not affiliated with Ruvati. Always confirm against your sink's spec sheet before ordering — we check it with you before production.