Cabinet for the VEVOR Fireclay Workstation W3320C Farmhouse Sink
The VEVOR Fireclay Workstation W3320C is a 33.46″ wide workstation undermount apron-front sink. It needs a 36-1/2″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, to the nearest 1/4″. We build it to order in any Sherwin-Williams color or natural white oak.
Fireclay sinks are kiln-fired, so each one can vary by about 1/4″ from its listed size. Measure your sink when it arrives and we build the cabinet to the measurement.
Inset farm sink base, 24″ deep × 34-1/2″ tall, apron opening cut to this sink. Any width to the nearest 1/4″.
VEVOR lists a 36″ minimum standard cabinet. Standard cabinets come in 3″ steps; because we build to the 1/4″, yours is sized to the sink itself.
VEVOR doesn't publish the apron height for this sink. Send us its spec sheet and we cut the opening to fit your countertop.
How your countertop changes the cabinet
With 3cm natural stone, quartz or butcher block, the VEVOR Fireclay Workstation W3320C sits flush with the top of the cabinet. With a 2cm counter, the sink sits 5/8″ to 3/4″ above the cabinet top, so the apron opening below it is that much shorter.
Will an inset cabinet hold this sink?
Yes. The inset face frame doesn't carry the sink's weight. Your cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a fireclay sink of any weight. Call us for details on supports for the VEVOR Fireclay Workstation W3320C.
VEVOR Fireclay Workstation W3320C specifications
| Model | W3320C |
|---|---|
| Overall width | 33.46″ |
| Front to back | 20.08″ |
| Apron height | Not published by VEVOR |
| Bowl depth | 9.13″ |
| Bowl | Single bowl |
| Material | Fireclay |
| Installation | undermount apron-front |
| Workstation ledge | Yes |
Included accessories: Multipurpose cutting board; Protective bottom grid; Stainless steel drain strainer; Installation accessory pack.
Questions about the VEVOR Fireclay Workstation W3320C cabinet
What size cabinet do I need for the VEVOR Fireclay Workstation W3320C?
The VEVOR Fireclay Workstation W3320C is 33.46″ wide, so it needs a 36-1/2″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, rounded to the nearest 1/4″. We build farm sink bases to order at any width to the nearest 1/4″, in any Sherwin-Williams color or in white oak.
How tall is the apron opening for the VEVOR Fireclay Workstation W3320C?
VEVOR doesn't publish this sink's apron height. With 3cm stone, quartz or butcher block the sink sits flush with the cabinet top; with 2cm it sits 5/8″ to 3/4″ higher. Send us the spec sheet and we cut the opening to fit.
Can an inset cabinet hold a heavy fireclay sink?
Yes. The inset face frame doesn't carry the sink's weight. The cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a sink of any weight, including fireclay and cast iron. Call us for details on the supports for your sink.
What colors can the cabinet for the VEVOR Fireclay Workstation W3320C come in?
Any Sherwin-Williams color, through our special-order program, or natural white oak. The face frame and doors are solid hardwood with flush inset doors, and the painted finish is factory-baked UV-cured lacquer.
Order the cabinet for this sink
Pick your finish, then tell us your sink model and countertop. We confirm every number against your sink's spec sheet before production. Special-order cabinets are built in 8–11 weeks.
Other VEVOR farmhouse sinks
- VEVOR Stainless Workstation Top-Mount TXHW302209RS1 — 30″ sink, 33″ cabinet
- VEVOR Fireclay Workstation KS3320W — 32.52″ sink, 35-1/2″ cabinet
- VEVOR Fireclay Workstation Double KS3320WD — 32.68″ sink, 35-3/4″ cabinet
- VEVOR Stainless Workstation Top-Mount TXHW332209RS1 — 33″ sink, 36″ cabinet
- VEVOR Stainless Workstation Top-Mount TXHW362209RS1 — 36″ sink, 39″ cabinet
Specifications from VEVOR's published information: source 1. VEVOR is a trademark of its owner; RTA Wholesalers is not affiliated with VEVOR. Always confirm against your sink's spec sheet before ordering — we check it with you before production.