30" Wide by 12" Deep Wall cabinets, select the desired height. Ivory Elegant Craftsman Shaker 1-1/4" Overlay wall kitchen cabinet RTA (Ready to Assemble).

The cabinet has an 1-1/4" Overlay-style face frame made of solid Oak wood. The cabinet sides, bottom, and top are constructed of 1/2″ premium plywood. The face frames and doors are made from 100% Oak hardwood. The face frame and doors are finished in ivory water-based UV lacquer, with the oak grain reading through. All other exposed visible areas will require skin finish and trim where necessary.

The front of the cabinet has two doors with six (6) way adjustable soft close hinges for comfortable operation and easy alignment on the overlay face frame.

All other exposed visible areas will require skin finish and trim where necessary.
Skin panels must be ordered for all exposed sides.

California CARB2 Compliant!

These cabinets are widely used over refrigerators. These cabinets can be "boxed in" with 24" x 96" side panels and a 1-1/2" face frame, or placed next to pantry cabinets.

**It is recommended to "box" in the refrigerator with a 1-1/2" wide, 3" wide, or 6" wide tall filler when placing a refrigerator against a wall, place a Pantry, Wall Oven, or side panel with 1-1/2" tall filler face frame on either side (or both sides) of the refrigerator when not next to the wall, pantry or wall oven.

Construction & Finish — Ivory Elegant Craftsman Shaker

The face frame and the door and drawer frames are solid oak milled in the Elegant Craftsman profile, with 1/4" plywood center panels. The Ivory finish is a water-based UV lacquer applied inside and out, and because the doors are genuine oak, the grain reads subtly through the painted surface — a hand-crafted character flat MDF doors cannot match. Cabinets up to 21" wide have a single door (pantries: two — one top, one bottom); 24"–42" widths have double doors (pantries: four — two top, two bottom).

The cabinet box is birch plywood finished to match the line. For a perfect exterior color and grain match, oak skin panels are required on all exposed sides; toe kick skin matches the exterior. Crown and trim pieces are solid oak.

Drawer boxes are solid wood with 1/2" thick sides, dovetail joints, and a 1/2" plywood bottom set in a dado cut, riding on DTC D-Motion face-frame full-extension soft-close undermount slides with Peg Lock. Doors swing on European-style hidden soft-close hinges. Cabinet hardware carries a lifetime warranty.

In-Stock Contractor Grade A ready to assemble (RTA) Craftsman kitchen cabinets for residential new construction and remodeling. All assembly hardware included; cabinet handles not included.