The Ivory Elegant Craftsman Shaker Crown Molding delivers the decorative finishing touch that takes a kitchen from builder-grade to custom. Milled from solid oak and finished in the line's rich, ivory water-based UV lacquer finish, this crown mounts along the top of your wall cabinets to close the gap to the ceiling with a clean, elegant transition. The 4-1/4" profile covers a 3" gap between cabinet and ceiling, giving your installation that fully built-in, high-end look. Ships ready to assemble (RTA) and cut to length on site.

Ivory Elegant Craftsman

Crown molding is the detail that ties an entire wall cabinet run together—finishing the tops with a substantial, decorative edge that draws the eye up and completes the room.

Features

• Solid oak crown molding, 4-1/4" profile
• Covers a 3" gap between wall cabinet and ceiling
• Mounts along the tops of wall cabinets for a finished, built-in look
• Finished in the line's ivory finish with clear-coat topcoat, all exposed surfaces ivory-painted oak
• Color-matched to Ivory Elegant Craftsman Shaker cabinets
• Easily cut to length on site

Specifications
Line: Ivory Elegant Craftsman Shaker
Color / Finish: Ivory water-based UV lacquer, ivory-painted oak on all exposed areas
Type: Crown Molding
Profile: 1-5/8" - 4-1/4"
Gap Coverage: 1 - 3" (cabinet to ceiling)
Length: [confirm — typically 96"]
Material: 100% solid oak
Assembly: RTA
Compliance: California CARB2

Construction & Finish — Ivory Elegant Craftsman Shaker

The face frame and the door and drawer frames are solid oak milled in the Elegant Craftsman profile, with 1/4" plywood center panels. The Ivory finish is a water-based UV lacquer applied inside and out, and because the doors are genuine oak, the grain reads subtly through the painted surface — a hand-crafted character flat MDF doors cannot match. Cabinets up to 21" wide have a single door (pantries: two — one top, one bottom); 24"–42" widths have double doors (pantries: four — two top, two bottom).

The cabinet box is birch plywood finished to match the line. For a perfect exterior color and grain match, oak skin panels are required on all exposed sides; toe kick skin matches the exterior. Crown and trim pieces are solid oak.

Drawer boxes are solid wood with 1/2" thick sides, dovetail joints, and a 1/2" plywood bottom set in a dado cut, riding on DTC D-Motion face-frame full-extension soft-close undermount slides with Peg Lock. Doors swing on European-style hidden soft-close hinges. Cabinet hardware carries a lifetime warranty.

In-Stock Contractor Grade A ready to assemble (RTA) Craftsman kitchen cabinets for residential new construction and remodeling. All assembly hardware included; cabinet handles not included.