The Ivory Elegant Craftsman Shaker Dishwasher End Panel gives your appliance run a clean, finished look wherever a cabinet side is left exposed. Cut from 1/2"-thick 7-ply plywood and finished in the line's rich, ivory water-based UV lacquer finish, this panel encloses the side of a dishwasher or other appliance so it reads as built-in cabinetry rather than an open gap. A 1-1/2" wide, 3/4"-thick solid oak face frame wraps the exposed plywood edge for a substantial, custom-fit finish that matches your cabinet fronts.

Installed at the exposed side of an appliance, the panel delivers that "boxed-in," fully finished appearance—covering the raw appliance side and tying it seamlessly into the surrounding Ivory Shaker cabinets.

Features

• Finished side panel to enclose exposed appliance sides (dishwasher or similar)
• 1/2"-thick 7-ply plywood construction
• 1-1/2" wide, 3/4"-thick solid oak face frame covers the exposed plywood edge
• Creates a "boxed," built-in look for appliances
• One visible side finished in the line's ivory finish
• Color-matched to Ivory Elegant Craftsman Shaker cabinets
• Easily cut to size on site

Specifications
Line: Ivory Elegant Craftsman Shaker
Color / Finish: Ivory water-based UV lacquer (one visible side)
Type: Dishwasher / Appliance End Panel
Width: 24"
Height: 34-1/2"
Thickness: 1/2" (7-ply plywood)
Face Frame: 1-1/2" wide x 3/4" thick, solid oak
Material: 7-ply plywood panel, solid oak face frame
Assembly: RTA
Compliance: California CARB2

Construction & Finish — Ivory Elegant Craftsman Shaker

The face frame and the door and drawer frames are solid oak milled in the Elegant Craftsman profile, with 1/4" plywood center panels. The Ivory finish is a water-based UV lacquer applied inside and out, and because the doors are genuine oak, the grain reads subtly through the painted surface — a hand-crafted character flat MDF doors cannot match. Cabinets up to 21" wide have a single door (pantries: two — one top, one bottom); 24"–42" widths have double doors (pantries: four — two top, two bottom).

The cabinet box is birch plywood finished to match the line. For a perfect exterior color and grain match, oak skin panels are required on all exposed sides; toe kick skin matches the exterior. Crown and trim pieces are solid oak.

Drawer boxes are solid wood with 1/2" thick sides, dovetail joints, and a 1/2" plywood bottom set in a dado cut, riding on DTC D-Motion face-frame full-extension soft-close undermount slides with Peg Lock. Doors swing on European-style hidden soft-close hinges. Cabinet hardware carries a lifetime warranty.

In-Stock Contractor Grade A ready to assemble (RTA) Craftsman kitchen cabinets for residential new construction and remodeling. All assembly hardware included; cabinet handles not included.