Cabinet for the Delta Rivet 95C9031-30S-SS Farmhouse Sink
The Delta Rivet 95C9031-30S-SS is a 29-7/8″ wide workstation undermount apron-front sink. It needs a 33″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, to the nearest 1/4″. We build it to order in any Sherwin-Williams color or natural white oak.
Inset farm sink base, 24″ deep × 34-1/2″ tall, apron opening cut to this sink. Any width to the nearest 1/4″.
Delta doesn't publish the apron height for this sink. Send us its spec sheet and we cut the opening to fit your countertop.
How your countertop changes the cabinet
With 3cm natural stone, quartz or butcher block, the Delta Rivet 95C9031-30S-SS sits flush with the top of the cabinet. With a 2cm counter, the sink sits 5/8″ to 3/4″ above the cabinet top, so the apron opening below it is that much shorter.
Will an inset cabinet hold this sink?
Yes. The inset face frame doesn't carry the sink's weight. Your cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a 16-gauge stainless steel sink of any weight. Call us for details on supports for the Delta Rivet 95C9031-30S-SS.
Delta Rivet 95C9031-30S-SS specifications
| Model | 95C9031-30S-SS |
|---|---|
| Overall width | 29-7/8″ |
| Front to back | 20-1/4″ |
| Apron height | Not published by Delta |
| Bowl depth | 10″ |
| Bowl | Single bowl |
| Material | 16-gauge stainless steel |
| Installation | undermount apron-front |
| Workstation ledge | Yes |
Included accessories: wood fiber cutting board; roll-up dish drying rack with utensil holder; stainless steel bottom grid; stainless steel drain assembly with removable cover; mounting hardware; cut-out template.
Questions about the Delta Rivet 95C9031-30S-SS cabinet
What size cabinet do I need for the Delta Rivet 95C9031-30S-SS?
The Delta Rivet 95C9031-30S-SS is 29-7/8″ wide, so it needs a 33″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, rounded to the nearest 1/4″. We build farm sink bases to order at any width to the nearest 1/4″, in any Sherwin-Williams color or in white oak.
How tall is the apron opening for the Delta Rivet 95C9031-30S-SS?
Delta doesn't publish this sink's apron height. With 3cm stone, quartz or butcher block the sink sits flush with the cabinet top; with 2cm it sits 5/8″ to 3/4″ higher. Send us the spec sheet and we cut the opening to fit.
Can an inset cabinet hold a heavy 16-gauge stainless steel sink?
Yes. The inset face frame doesn't carry the sink's weight. The cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a sink of any weight, including fireclay and cast iron. Call us for details on the supports for your sink.
What colors can the cabinet for the Delta Rivet 95C9031-30S-SS come in?
Any Sherwin-Williams color, through our special-order program, or natural white oak. The face frame and doors are solid hardwood with flush inset doors, and the painted finish is factory-baked UV-cured lacquer.
Order the cabinet for this sink
Pick your finish, then tell us your sink model and countertop. We confirm every number against your sink's spec sheet before production. Special-order cabinets are built in 8–11 weeks.
Other Delta farmhouse sinks
- Delta Rivet 95D9031-T30S-GS — 29.88″ sink, 33″ cabinet
- Delta Lenta 95J132-T30S-SS — 29.88″ sink, 33″ cabinet
- Delta Rivet 95C9031-33S-SS — 32-7/8″ sink, 36″ cabinet
- Delta Rivet 95D9031-T33S-GS — 32.88″ sink, 36″ cabinet
- Delta Lenta 95J132-T33S-SS — 32.88″ sink, 36″ cabinet
- Delta Rivet 95C9031-36S-SS — 35-7/8″ sink, 39″ cabinet
- Delta Rivet 95D9031-T36S-GS — 35.88″ sink, 39″ cabinet
- Delta Lenta 95J132-T36S-SS — 35.88″ sink, 39″ cabinet
Specifications from Delta's published information: source 1 · source 2. Delta is a trademark of its owner; RTA Wholesalers is not affiliated with Delta. Always confirm against your sink's spec sheet before ordering — we check it with you before production.