Cabinet for the Delta Rivet 95D9031-T36S-GS Farmhouse Sink
The Delta Rivet 95D9031-T36S-GS is a 35.88″ wide workstation top-mount (drop-in) apron-front sink. It needs a 39″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, to the nearest 1/4″. We build it to order in any Sherwin-Williams color or natural white oak.
Inset farm sink base, 24″ deep × 34-1/2″ tall, apron opening cut to this sink. Any width to the nearest 1/4″.
This top-mount apron sink rests on the cabinet. We cut the apron opening to the sink's spec sheet. Call us for details.
How your countertop changes the cabinet
With 3cm natural stone, quartz or butcher block, the Delta Rivet 95D9031-T36S-GS sits flush with the top of the cabinet. With a 2cm counter, the sink sits 5/8″ to 3/4″ above the cabinet top, so the apron opening below it is that much shorter.
Will an inset cabinet hold this sink?
Yes. The inset face frame doesn't carry the sink's weight. Your cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a 16-gauge stainless steel sink of any weight. Call us for details on supports for the Delta Rivet 95D9031-T36S-GS.
Delta Rivet 95D9031-T36S-GS specifications
| Model | 95D9031-T36S-GS |
|---|---|
| Overall width | 35.88″ |
| Front to back | 22.63″ |
| Apron height | Not published by Delta |
| Bowl depth | 8″ |
| Bowl | Single bowl |
| Material | 16-gauge stainless steel |
| Installation | top-mount (drop-in) apron-front |
| Workstation ledge | Yes |
Included accessories: wood fiber cutting board (12 x 16.75 x 0.75 in); roll-up dish drying rack with utensil holder; stainless steel bottom grid; drain assembly with decorative cover; mounting hardware.
Questions about the Delta Rivet 95D9031-T36S-GS cabinet
What size cabinet do I need for the Delta Rivet 95D9031-T36S-GS?
The Delta Rivet 95D9031-T36S-GS is 35.88″ wide, so it needs a 39″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, rounded to the nearest 1/4″. We build farm sink bases to order at any width to the nearest 1/4″, in any Sherwin-Williams color or in white oak.
How tall is the apron opening for the Delta Rivet 95D9031-T36S-GS?
The Delta Rivet 95D9031-T36S-GS is a top-mount apron sink, so it rests on the cabinet rather than hanging below the counter. Send us the sink's spec sheet and we cut the apron opening to its exact apron height. Call us for details.
Can an inset cabinet hold a heavy 16-gauge stainless steel sink?
Yes. The inset face frame doesn't carry the sink's weight. The cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a sink of any weight, including fireclay and cast iron. Call us for details on the supports for your sink.
What colors can the cabinet for the Delta Rivet 95D9031-T36S-GS come in?
Any Sherwin-Williams color, through our special-order program, or natural white oak. The face frame and doors are solid hardwood with flush inset doors, and the painted finish is factory-baked UV-cured lacquer.
Order the cabinet for this sink
Pick your finish, then tell us your sink model and countertop. We confirm every number against your sink's spec sheet before production. Special-order cabinets are built in 8–11 weeks.
Other Delta farmhouse sinks
- Delta Rivet 95C9031-30S-SS — 29-7/8″ sink, 33″ cabinet
- Delta Rivet 95D9031-T30S-GS — 29.88″ sink, 33″ cabinet
- Delta Lenta 95J132-T30S-SS — 29.88″ sink, 33″ cabinet
- Delta Rivet 95C9031-33S-SS — 32-7/8″ sink, 36″ cabinet
- Delta Rivet 95D9031-T33S-GS — 32.88″ sink, 36″ cabinet
- Delta Lenta 95J132-T33S-SS — 32.88″ sink, 36″ cabinet
- Delta Rivet 95C9031-36S-SS — 35-7/8″ sink, 39″ cabinet
- Delta Lenta 95J132-T36S-SS — 35.88″ sink, 39″ cabinet
Specifications from Delta's published information: source 1. Delta is a trademark of its owner; RTA Wholesalers is not affiliated with Delta. Always confirm against your sink's spec sheet before ordering — we check it with you before production.