Stock, Semi-Custom & Custom  |  Inset & Overlay Kitchen Cabinets  📞 833-377-8663

Cabinet for the Elkay Crosstown Workstation EFRUFF30179RW Farmhouse Sink

The Elkay Crosstown Workstation EFRUFF30179RW is a 31-7/8″ wide workstation undermount apron-front sink. It needs a 35″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, to the nearest 1/4″. We build it to order in any Sherwin-Williams color or natural white oak.

Your cabinet
35″ wide

Inset farm sink base, 24″ deep × 34-1/2″ tall, apron opening cut to this sink. Any width to the nearest 1/4″.

Elkay lists a 36″ minimum standard cabinet. Standard cabinets come in 3″ steps; because we build to the 1/4″, yours is sized to the sink itself.

Apron opening
10″ with 3cm or butcher block
9-1/4″–9-3/8″ with 2cm

How your countertop changes the cabinet

With 3cm natural stone, quartz or butcher block, the Elkay Crosstown Workstation EFRUFF30179RW sits flush with the top of the cabinet. With a 2cm counter, the sink sits 5/8″ to 3/4″ above the cabinet top, so the apron opening below it is that much shorter.

CountertopSink sitsApron opening
3cm stone or quartzFlush with cabinet top10″
Butcher blockFlush with cabinet top10″
2cm stone or quartz5/8″–3/4″ above cabinet top9-1/4″ – 9-3/8″

Will an inset cabinet hold this sink?

Yes. The inset face frame doesn't carry the sink's weight. Your cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a 16-gauge stainless steel sink of any weight. Call us for details on supports for the Elkay Crosstown Workstation EFRUFF30179RW.

Elkay Crosstown Workstation EFRUFF30179RW specifications

ModelEFRUFF30179RW
Overall width31-7/8″
Front to back20-1/4″
Apron height10″
Bowl depth9″
BowlSingle bowl
Material16-gauge stainless steel
Installationundermount apron-front
Workstation ledgeYes

Included accessories: LKDD drain; CTXBG2814 bottom grid; LKCB1217AC acacia cutting board; LKC0717SS colander; LKDR1317RU roll-up drying rack; LKDR0717SS drying rack.

Questions about the Elkay Crosstown Workstation EFRUFF30179RW cabinet

What size cabinet do I need for the Elkay Crosstown Workstation EFRUFF30179RW?

The Elkay Crosstown Workstation EFRUFF30179RW is 31-7/8″ wide, so it needs a 35″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, rounded to the nearest 1/4″. We build farm sink bases to order at any width to the nearest 1/4″, in any Sherwin-Williams color or in white oak.

How tall is the apron opening for the Elkay Crosstown Workstation EFRUFF30179RW?

With 3cm stone, quartz or butcher block, the sink sits flush with the cabinet top, so the opening matches the 10″ apron. With a 2cm counter the sink sits 5/8″ to 3/4″ higher, so the opening is 9-1/4″ to 9-3/8″. We cut the opening to your sink and countertop.

Can an inset cabinet hold a heavy 16-gauge stainless steel sink?

Yes. The inset face frame doesn't carry the sink's weight. The cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a sink of any weight, including fireclay and cast iron. Call us for details on the supports for your sink.

What colors can the cabinet for the Elkay Crosstown Workstation EFRUFF30179RW come in?

Any Sherwin-Williams color, through our special-order program, or natural white oak. The face frame and doors are solid hardwood with flush inset doors, and the painted finish is factory-baked UV-cured lacquer.

Order the cabinet for this sink

Pick your finish, then tell us your sink model and countertop. We confirm every number against your sink's spec sheet before production. Special-order cabinets are built in 8–11 weeks.

Painted inset — any Sherwin-Williams colorWhite oak insetCall or message us

Other Elkay farmhouse sinks

Specifications from Elkay's published information: source 1 · source 2 · source 3. Elkay is a trademark of its owner; RTA Wholesalers is not affiliated with Elkay. Always confirm against your sink's spec sheet before ordering — we check it with you before production.