Stock, Semi-Custom & Custom  |  Inset & Overlay Kitchen Cabinets  📞 833-377-8663

Cabinet for the Elkay Fireclay Workstation SWUF13020CBWH Farmhouse Sink

The Elkay Fireclay Workstation SWUF13020CBWH is a 30″ wide workstation undermount apron-front sink. It needs a 33″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, to the nearest 1/4″. We build it to order in any Sherwin-Williams color or natural white oak.

Fireclay sinks are kiln-fired, so each one can vary by about 1/4″ from its listed size. Measure your sink when it arrives and we build the cabinet to the measurement.

Your cabinet
33″ wide

Inset farm sink base, 24″ deep × 34-1/2″ tall, apron opening cut to this sink. Any width to the nearest 1/4″.

Apron opening

Elkay doesn't publish the apron height for this sink. Send us its spec sheet and we cut the opening to fit your countertop.

How your countertop changes the cabinet

With 3cm natural stone, quartz or butcher block, the Elkay Fireclay Workstation SWUF13020CBWH sits flush with the top of the cabinet. With a 2cm counter, the sink sits 5/8″ to 3/4″ above the cabinet top, so the apron opening below it is that much shorter.

Will an inset cabinet hold this sink?

Yes. The inset face frame doesn't carry the sink's weight. Your cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a fireclay sink of any weight. Call us for details on supports for the Elkay Fireclay Workstation SWUF13020CBWH.

Elkay Fireclay Workstation SWUF13020CBWH specifications

ModelSWUF13020CBWH
Overall width30″
Front to back18-13/16″
Apron heightNot published by Elkay
Bowl depth9-5/8″
BowlSingle bowl
MaterialFireclay
Installationundermount apron-front
Workstation ledgeYes

Included accessories: LKCB1218HW cutting board; LKOBG2715SS bottom grid; LK99FC drain; LKCLKIT cleaning kit.

Questions about the Elkay Fireclay Workstation SWUF13020CBWH cabinet

What size cabinet do I need for the Elkay Fireclay Workstation SWUF13020CBWH?

The Elkay Fireclay Workstation SWUF13020CBWH is 30″ wide, so it needs a 33″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, rounded to the nearest 1/4″. We build farm sink bases to order at any width to the nearest 1/4″, in any Sherwin-Williams color or in white oak.

How tall is the apron opening for the Elkay Fireclay Workstation SWUF13020CBWH?

Elkay doesn't publish this sink's apron height. With 3cm stone, quartz or butcher block the sink sits flush with the cabinet top; with 2cm it sits 5/8″ to 3/4″ higher. Send us the spec sheet and we cut the opening to fit.

Can an inset cabinet hold a heavy fireclay sink?

Yes. The inset face frame doesn't carry the sink's weight. The cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a sink of any weight, including fireclay and cast iron. Call us for details on the supports for your sink.

What colors can the cabinet for the Elkay Fireclay Workstation SWUF13020CBWH come in?

Any Sherwin-Williams color, through our special-order program, or natural white oak. The face frame and doors are solid hardwood with flush inset doors, and the painted finish is factory-baked UV-cured lacquer.

Order the cabinet for this sink

Pick your finish, then tell us your sink model and countertop. We confirm every number against your sink's spec sheet before production. Special-order cabinets are built in 8–11 weeks.

Painted inset — any Sherwin-Williams colorWhite oak insetCall or message us

Other Elkay farmhouse sinks

Specifications from Elkay's published information: source 1. Elkay is a trademark of its owner; RTA Wholesalers is not affiliated with Elkay. Always confirm against your sink's spec sheet before ordering — we check it with you before production.