Stock, Semi-Custom & Custom  |  Inset & Overlay Kitchen Cabinets  📞 833-377-8663

Cabinet for the Sinkology Josephine Quick-Fit SK450-34FC Farmhouse Sink

The Sinkology Josephine Quick-Fit SK450-34FC is a 33.85″ wide top-mount (drop-in) apron-front sink. It needs a 36-3/4″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, to the nearest 1/4″. We build it to order in any Sherwin-Williams color or natural white oak.

Fireclay sinks are kiln-fired, so each one can vary by about 1/4″ from its listed size. Measure your sink when it arrives and we build the cabinet to the measurement.

Your cabinet
36-3/4″ wide

Inset farm sink base, 24″ deep × 34-1/2″ tall, apron opening cut to this sink. Any width to the nearest 1/4″.

Sinkology lists a 36″ minimum standard cabinet. Standard cabinets come in 3″ steps; because we build to the 1/4″, yours is sized to the sink itself.

Apron opening

This top-mount apron sink rests on the cabinet. We cut the apron opening to the sink's spec sheet. Call us for details.

How your countertop changes the cabinet

With 3cm natural stone, quartz or butcher block, the Sinkology Josephine Quick-Fit SK450-34FC sits flush with the top of the cabinet. With a 2cm counter, the sink sits 5/8″ to 3/4″ above the cabinet top, so the apron opening below it is that much shorter.

Will an inset cabinet hold this sink?

Yes. The inset face frame doesn't carry the sink's weight. Your cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a fireclay sink of any weight. Call us for details on supports for the Sinkology Josephine Quick-Fit SK450-34FC.

Sinkology Josephine Quick-Fit SK450-34FC specifications

ModelSK450-34FC
Overall width33.85″
Front to back24-1/4″
Apron height7-3/4″
Bowl depth9″
BowlSingle bowl
MaterialFireclay
Installationtop-mount (drop-in) apron-front
Workstation ledgeNo

Questions about the Sinkology Josephine Quick-Fit SK450-34FC cabinet

What size cabinet do I need for the Sinkology Josephine Quick-Fit SK450-34FC?

The Sinkology Josephine Quick-Fit SK450-34FC is 33.85″ wide, so it needs a 36-3/4″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, rounded to the nearest 1/4″. We build farm sink bases to order at any width to the nearest 1/4″, in any Sherwin-Williams color or in white oak.

How tall is the apron opening for the Sinkology Josephine Quick-Fit SK450-34FC?

The Sinkology Josephine Quick-Fit SK450-34FC is a top-mount apron sink, so it rests on the cabinet rather than hanging below the counter. Send us the sink's spec sheet and we cut the apron opening to its exact apron height. Call us for details.

Can an inset cabinet hold a heavy fireclay sink?

Yes. The inset face frame doesn't carry the sink's weight. The cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a sink of any weight, including fireclay and cast iron. Call us for details on the supports for your sink.

What colors can the cabinet for the Sinkology Josephine Quick-Fit SK450-34FC come in?

Any Sherwin-Williams color, through our special-order program, or natural white oak. The face frame and doors are solid hardwood with flush inset doors, and the painted finish is factory-baked UV-cured lacquer.

Order the cabinet for this sink

Pick your finish, then tell us your sink model and countertop. We confirm every number against your sink's spec sheet before production. Special-order cabinets are built in 8–11 weeks.

Painted inset — any Sherwin-Williams colorWhite oak insetCall or message us

Other Sinkology farmhouse sinks

Specifications from Sinkology's published information: source 1 · source 2. Sinkology is a trademark of its owner; RTA Wholesalers is not affiliated with Sinkology. Always confirm against your sink's spec sheet before ordering — we check it with you before production.