Signature Hardware Farmhouse Sink Cabinets
Every Signature Hardware farmhouse sink below needs an inset farm sink base 3″ wider than the sink: from 32-3/4″ to 39″ wide for the 5 models listed. Tap a model for its apron opening by countertop and full specs.
| Sink | Sink width | Type | Our cabinet |
|---|---|---|---|
| Wenbrook 953522 | 29-13/16″ | Single bowl, undermount | 32-3/4″ |
| Brumfield 433934 | 30″ | Single bowl, undermount | 33″ |
| Workspace 948499Workstation | 32-1/2″ | Single bowl, undermount | 35-1/2″ |
| Brumfield 482206 | 33-5/16″ | Single bowl, undermount | 36-1/4″ |
| Rowena 953910-36D | 35-7/8″ | Double bowl, undermount | 39″ |
How we size it
Width: sink + 3″
Every inset farm sink base is built 1-1/2″ wider than the sink on each side for the face frame, to the nearest 1/4″. A 35.24″ sink gets a 38-1/4″ cabinet.
Apron opening: set by your countertop
3cm stone, quartz and butcher block: the sink sits flush with the cabinet top. 2cm counters: the sink sits 5/8″ to 3/4″ above it, so the opening is that much shorter.
Any sink weight
The inset face frame doesn't carry the sink. Your installer adds interior supports, so fireclay and cast iron are fine. Call us for details.
Special order, any size
Any width to the nearest 1/4″, in any Sherwin-Williams color or natural white oak.
Order the cabinet for your Signature Hardware sink
Pick your finish, then tell us your sink model and countertop. We confirm every number against your sink's spec sheet before production. Special-order cabinets are built in 8–11 weeks.
Signature Hardware is a trademark of its owner. RTA Wholesalers is not affiliated with Signature Hardware. Specifications come from Signature Hardware's published spec sheets and product pages; confirm against your sink's spec sheet before ordering.