Cabinet for the Signature Hardware Brumfield 433934 Farmhouse Sink
The Signature Hardware Brumfield 433934 is a 30″ wide undermount apron-front sink. It needs a 33″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, to the nearest 1/4″. We build it to order in any Sherwin-Williams color or natural white oak.
Signature Hardware doesn't publish a spec sheet for this sink, so these dimensions come from retailer listings. Send us the sink's measurements or spec sheet and we confirm the cabinet before production.
Inset farm sink base, 24″ deep × 34-1/2″ tall, apron opening cut to this sink. Any width to the nearest 1/4″.
Signature Hardware doesn't publish the apron height for this sink. Send us its spec sheet and we cut the opening to fit your countertop.
How your countertop changes the cabinet
With 3cm natural stone, quartz or butcher block, the Signature Hardware Brumfield 433934 sits flush with the top of the cabinet. With a 2cm counter, the sink sits 5/8″ to 3/4″ above the cabinet top, so the apron opening below it is that much shorter.
Will an inset cabinet hold this sink?
Yes. The inset face frame doesn't carry the sink's weight. Your cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a fireclay sink of any weight. Call us for details on supports for the Signature Hardware Brumfield 433934.
Signature Hardware Brumfield 433934 specifications
| Model | 433934 |
|---|---|
| Also sold as | 433932-30 |
| Overall width | 30″ |
| Front to back | 18-7/8″ |
| Apron height | Not published by Signature Hardware |
| Bowl depth | 8-1/2″ |
| Bowl | Single bowl |
| Material | Fireclay |
| Installation | undermount apron-front |
| Workstation ledge | No |
Questions about the Signature Hardware Brumfield 433934 cabinet
What size cabinet do I need for the Signature Hardware Brumfield 433934?
The Signature Hardware Brumfield 433934 is 30″ wide, so it needs a 33″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, rounded to the nearest 1/4″. We build farm sink bases to order at any width to the nearest 1/4″, in any Sherwin-Williams color or in white oak.
How tall is the apron opening for the Signature Hardware Brumfield 433934?
Signature Hardware doesn't publish this sink's apron height. With 3cm stone, quartz or butcher block the sink sits flush with the cabinet top; with 2cm it sits 5/8″ to 3/4″ higher. Send us the spec sheet and we cut the opening to fit.
Can an inset cabinet hold a heavy fireclay sink?
Yes. The inset face frame doesn't carry the sink's weight. The cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a sink of any weight, including fireclay and cast iron. Call us for details on the supports for your sink.
What colors can the cabinet for the Signature Hardware Brumfield 433934 come in?
Any Sherwin-Williams color, through our special-order program, or natural white oak. The face frame and doors are solid hardwood with flush inset doors, and the painted finish is factory-baked UV-cured lacquer.
Order the cabinet for this sink
Pick your finish, then tell us your sink model and countertop. We confirm every number against your sink's spec sheet before production. Special-order cabinets are built in 8–11 weeks.
Other Signature Hardware farmhouse sinks
- Signature Hardware Wenbrook 953522 — 29-13/16″ sink, 32-3/4″ cabinet
- Signature Hardware Workspace 948499 — 32-1/2″ sink, 35-1/2″ cabinet
- Signature Hardware Brumfield 482206 — 33-5/16″ sink, 36-1/4″ cabinet
- Signature Hardware Rowena 953910-36D — 35-7/8″ sink, 39″ cabinet
Specifications from Signature Hardware's published information: source 1. Signature Hardware is a trademark of its owner; RTA Wholesalers is not affiliated with Signature Hardware. Always confirm against your sink's spec sheet before ordering — we check it with you before production.