Cabinet for the Signature Hardware Workspace 948499 Farmhouse Sink
The Signature Hardware Workspace 948499 is a 32-1/2″ wide workstation undermount apron-front sink. It needs a 35-1/2″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, to the nearest 1/4″. We build it to order in any Sherwin-Williams color or natural white oak.
Inset farm sink base, 24″ deep × 34-1/2″ tall, apron opening cut to this sink. Any width to the nearest 1/4″.
How your countertop changes the cabinet
With 3cm natural stone, quartz or butcher block, the Signature Hardware Workspace 948499 sits flush with the top of the cabinet. With a 2cm counter, the sink sits 5/8″ to 3/4″ above the cabinet top, so the apron opening below it is that much shorter.
| Countertop | Sink sits | Apron opening |
|---|---|---|
| 3cm stone or quartz | Flush with cabinet top | 9″ |
| Butcher block | Flush with cabinet top | 9″ |
| 2cm stone or quartz | 5/8″–3/4″ above cabinet top | 8-1/4″ – 8-3/8″ |
Will an inset cabinet hold this sink?
Yes. The inset face frame doesn't carry the sink's weight. Your cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a 16-gauge stainless steel sink of any weight. Call us for details on supports for the Signature Hardware Workspace 948499.
Signature Hardware Workspace 948499 specifications
| Model | 948499 |
|---|---|
| Also sold as | SHWORK1BZA |
| Overall width | 32-1/2″ |
| Front to back | 21-3/4″ |
| Apron height | 9″ |
| Bowl depth | — |
| Bowl | Single bowl |
| Material | 16-gauge stainless steel |
| Installation | undermount apron-front |
| Workstation ledge | Yes |
Included accessories: wood cutting board; flat colander plate; bottom basin grid.
Questions about the Signature Hardware Workspace 948499 cabinet
What size cabinet do I need for the Signature Hardware Workspace 948499?
The Signature Hardware Workspace 948499 is 32-1/2″ wide, so it needs a 35-1/2″ inset farm sink base: the sink width plus 1-1/2″ of face frame on each side, rounded to the nearest 1/4″. We build farm sink bases to order at any width to the nearest 1/4″, in any Sherwin-Williams color or in white oak.
How tall is the apron opening for the Signature Hardware Workspace 948499?
With 3cm stone, quartz or butcher block, the sink sits flush with the cabinet top, so the opening matches the 9″ apron. With a 2cm counter the sink sits 5/8″ to 3/4″ higher, so the opening is 8-1/4″ to 8-3/8″. We cut the opening to your sink and countertop.
Can an inset cabinet hold a heavy 16-gauge stainless steel sink?
Yes. The inset face frame doesn't carry the sink's weight. The cabinet installer adds interior supports inside the cabinet, so an inset farm sink base holds a sink of any weight, including fireclay and cast iron. Call us for details on the supports for your sink.
What colors can the cabinet for the Signature Hardware Workspace 948499 come in?
Any Sherwin-Williams color, through our special-order program, or natural white oak. The face frame and doors are solid hardwood with flush inset doors, and the painted finish is factory-baked UV-cured lacquer.
Order the cabinet for this sink
Pick your finish, then tell us your sink model and countertop. We confirm every number against your sink's spec sheet before production. Special-order cabinets are built in 8–11 weeks.
Other Signature Hardware farmhouse sinks
- Signature Hardware Brumfield 433934 — 30″ sink, 33″ cabinet
- Signature Hardware Wenbrook 953522 — 29-13/16″ sink, 32-3/4″ cabinet
- Signature Hardware Brumfield 482206 — 33-5/16″ sink, 36-1/4″ cabinet
- Signature Hardware Rowena 953910-36D — 35-7/8″ sink, 39″ cabinet
Specifications from Signature Hardware's published information: source 1 · source 2 · source 3 · source 4. Signature Hardware is a trademark of its owner; RTA Wholesalers is not affiliated with Signature Hardware. Always confirm against your sink's spec sheet before ordering — we check it with you before production.